Technology has been innovated to a large extent to convert natural pictures into high-standard printing and scanning quality. It also offers glossy prints reducing natural-looking photos. But you must follow some instructions to set up ij.start.canon.ts3122.
● Enable easy wireless to couple your printer and configure the driver
● Press on the stop button control panel if the ON lamp is flashing
● Press on the starting screen
● Press Yes on the license agreement and choose the method of connection
● Choose the wireless router and wait till the network setup and finish up the print head alignment
● In the final layout, finish up the software installation and resume your system.
Visit - ij-start-canon
Part 1: Start Easy Wireless Connect on Your Printer Device
Before you start with the setup process on your PC, you need to first begin the Easy Wireless Connect process on your PC.
Step 1: First of all, press the Direct button A on your printer device and keep on holding it. After that, leave the button when the light B will start blinking.
Step 2: Please ensure that the Wi-Fi icon and horizontal bar are blinking on the screen.
Part 2: Download and Run the Setup File for Installing the Drivers
Step 1: Start running the setup file and then select the option of Start Setup.
Step 2: After that, the notice of network security will appear on the screen. Read it and select Next.
Step 3: Take a good look at the license agreement and click on yes if you wish to continue. If you will click on the option of "No", then the installation process will stop.
Step 4: Now, an information request will open up before you. There, you can either click on Agree or Do not Agree.
Step 5: If you select the option of Do not agree, then a message box will open up before you stating that if you select this option, then you will not be able to receive any information related to your Canon printer from the internet.
Step 6: After that, choose the option of "Yes" for confirming the method of connection.
Step 7: Based on the type of your network setup, you will see a select network SSID screen. Please ensure that you select the network of 2.4 GHz frequency by going to the drop-down list.
Step 8: Once your connection is done, then select the option of Next. In case it does not detect your printer, then you may have to turn off the antivirus software.
Step 9: Select the option of Next.
Step 10: Now, if you want to download another software, then select the option of Continue online
Hope this helps you out.